AD450 RF PCB Hi,
Hope this email finds you well. This RF PCBs can readily replace FR-4 in higher frequencies applications where higher frequencies and expectations for increased fidelity with broadband signal are beyond the performance offered by FR-4.
Rogers (Arlon) AD450 It is a woven fiberglass reinforced, ceramic filled, PTFE based composite material for microwave printed circuit boards. With a dielectric constant of 4.5, most FR-4 designs can be readily transferred in applications where higher frequencies and expectations for increased fidelity with broadband signal.
Our PCB Capability (AD450) PCB Material: Woven Fiberglass Re inforced, Ceramic filled, PTFE based Composite Designation: AD450 Dielectric constant: 4.5 Layer count: Double Layer, Multilayer, Hybrid PCB Copper weight: 0.5oz (17 µm), 1oz (35µm), 2oz (70µm) PCB thickness: 10mil (0.254mm), 20mil (0.508mm), 30mil(0.762mm), 40mil(1.016mm), 50mil (1.27mm), 60mil (1.524mm), 70mil(1.778mm), 90mil (2.286mm), 180mil (4.572mm), 200mil (5.08mm), 230mil (5.842mm) PCB size: ≤400mm X 500mm Solder mask: Green, Black, Blue, Yellow, Red etc. Surface finish: Bare copper, HASL, ENIG, OSP etc..
If you have requirements on high frequency PCB’s, please do not hesitate to contact us by simply reply back to this email. I will get back to you ASAP.
Kind Regards Jane Shi | Business development Bicheng PCB | www.highfrequencypcb.com | Material partners: Rogers, Taconic, ITEQ, SHENGYI, TAIYO, KUANGSHUN If you do not want to receive emails from Bicheng about marketing communications and special offers, reply as “remove” in the subject line.
